Call us: +902127710145
Follow us:

Boiler Automation Products

(All Products)

DBV-10 Boiler Automatic Bottom Blowdown System

The formation of hard accumulation in boilers (stone and mud ) is caused by some impurities and corrosion products contained in water. Examples of water impurities are; dissolved calcium, magnesium chloride, ...

Go to product page »

YBS-20 Surface Blowdown System (For Steam Generators)

Automatic TDS Blowdown Control System for Steam Generator. The steam produced by the steam generators contains 15% water vapor and the steam separator must be used for the desired dry steam. The water evacuat...

Go to product page »

NK-16 Boiler Water Sampler

It is necessary to take samples from the boiler water from time to time to check whether the boiler water conductivity value is measured correctly. If the boiler water is taken to an open case, some of the sa...

Go to product page »

Condensate Pollution Control System

In order for a steam installation to work efficiently, the condensate which is going to the boiler feed tank must be in
maximum quantity and clean.

Any drilling of th...

Go to product page »

ASK-P3P4 Liquid Level Relay

Working Principle

By relay output, automatic control is provided by sending a signal to the solenoid valve coil or motor contactor. It is also possible to receive a signal...

Go to product page »

ASD Compact Deaerator

The Compact Deaerator is designed to remove dissolved gases and oxygen from the boiler feedwater by appropriately mixing the condensate, flash steam and cold feed water. Ayvaz compact deaerator is made of sta...

Go to product page »

YBS-10 Surface Blowdown System

The density of total desolved substances (TDS) in water increases during steam production. In such a case, boiler and steam lines may be damaged if the specified limits are exceeded. These damages can create ...

Go to product page »