GENERAL FEATURES

The pressure reducing valve are used separately to the building entrances or to each apartment entrance in order to balance the pressure in the system. It is sufficient for the pressure reducing valve to have a value between 3 and 4 bar.

When these valves are in use, putting strainers in front of them will be enough to prevent any damage to this product. In systems where more than one pressure reducing valve is used, it is important that strainers are used at the main entrance of the building.

The water pressure at the back of the valve can be adjusted with the allen wrech heads located on the opposite side of product. Manometer indicator which can be used with product, pressure range 3 bar set at factory settings, but it has 0-6 bar bar settings area.

Application Areas
- City water lines before building water meters
- Water clock at apartment entrance
- Pump and water booster entrance
- In front of devices that need to be protected from high pressure
- At the entrance of the boiler and water heater

Product Material
Body: Brass

Connection:
Threaded

Max. Working Temperature:
90 °C

Max. Working Pressure:
16 bar

Nominal Diameter:
DN15 (1/2") – DN50 (2")

Setting Range for Manometer:
(0,1-6 bar)