Double Gimbal Expansion Joints

Gimbal type expansion joints are designed to permit angular rotation in any plane by the use of two pairs of hinges affixed to a common floating gimbal ring. Simply, a double gimbal expansion joint is consisted of two single gimbal expansion joints and an intermediate pipe connects them each other. The advantage of this arrangement is the ability to absorb a large lateral movement in any plane at each end.

Classical double gimbal expansion joints are used to absorb lateral & angular deflections in all planes. The gimbals of this expansion joints are designed as to withstand against pressure thrust and they are called restrained type expansion joints. The amount of lateral deflection depends on the convolution number of the bellows on each side and the length of the intermediate pipe. Standard range of Ayvaz double gimbal expansion joints are designed mostly for fire protection lines where the deflections are not caused by thermal movements but seismic movements. In order to absorb the axial movements caused by the seismic movements, Ayvaz standard range expansion joints are finished with an axial movement capacity which is limited by the slot gap on the gimbals.

Bellow Material
Stainless Steel AISI 321 (Opt. 304,316L, 316TI, 309)

Connection Types
Fixed and Floating Flanged, Welded Ended & Grooved

Flange Material
PN 16, St.37.2 as standard, the material can be customised on request

Inner Sleeve
Available in stainless steel AISI 321 (Opt. 304,316L, 316TI, 309) on request

Operating Temperature
-10°C/+550°C

Operating Pressure
175 psi & 250 psi
Can be produced with different pressure rates PN 2,5- PN 63

TYPES

Flanged

• 50 mm movement
• 100 mm movement
• 150 mm movement
• 200 mm movement

Welded End

• 50 mm movement
• 100 mm movement
• 150 mm movement
• 200 mm movement

Grooved

• 50 mm movement
• 100 mm movement
• 150 mm movement
• 200 mm movement

Double Gimbal Expansion Joint Installation